This is a working overview of Ultrafiltration, written for readers who want more than a one-paragraph summary but less than a textbook.
This page was last updated on 2026-03-31 and is reviewed periodically as new material appears.
Quality control checks identity, composition, and contaminants. Moisture, ash, fat, and carbohydrate are measured by standard methods, and microbiological limits are set for total counts, coliforms, and specific pathogens. Heavy metals and pesticide residues may be monitored depending on market requirements. Adulteration with intact whey protein or individual amino acids is possible, so peptide fingerprints and free amino acid profiles can help verify authenticity. Regulatory frameworks vary: some countries treat hydrolyzed whey as a conventional dairy ingredient, while infant formula uses face additional compositional rules. Which marker peptides best confirm source and processing remains an open analytical question.
Storage stability depends on moisture, temperature, and packaging. Dry powders with low water activity resist microbial growth, but they can still absorb water, develop off-colors through Maillard reactions, or oxidize residual lipids. Sealed containers kept in a cool, dry place are standard. Stability studies typically monitor moisture, solubility, color, peptide size, and microbial counts over months. Established practice favors low humidity and moderate temperatures. How brief excursions above recommended conditions affect peptide profiles and sensory qualities is less predictable and may depend on the specific product matrix.
Hydrolysate powders are hygroscopic and can absorb moisture during storage, which may promote caking, browning, and loss of solubility. Cool, dry conditions and sealed packaging slow these changes, while high humidity and warm temperatures accelerate Maillard reactions between peptides and residual sugars. Liquid hydrolysates are more perishable and often require refrigeration or preservatives. Shelf-life studies usually monitor moisture, color, solubility, free amino groups, and microbial load over time. Stability depends on residual lactose, water activity, packaging barrier properties, and the initial peptide profile.
Degree of hydrolysis is commonly estimated by titrating liberated carboxyl groups, measuring soluble nitrogen in trichloroacetic acid, or using o-phthaldialdehyde assays. Molecular weight distribution is often examined by size-exclusion chromatography, sodium dodecyl sulfate polyacrylamide gel electrophoresis, or mass spectrometry. These methods answer different questions: titration estimates bond cleavage, while chromatography describes peptide size ranges. Because no single reference method is universally applied, values reported by different laboratories may not be directly comparable. Method details such as calibration standards and sample preparation strongly influence results.
| Property | Value | Notes |
|---|---|---|
| Total protein | 70–85% dry basis | Kjeldahl or Dumas with factor 6.38. |
| Peptide-bond cleavage | 5–35% | TNBS or OPA; assay-dependent. |
| Peptide size | Mostly 0.2–10 kDa | Size-exclusion chromatography. |
| Water activity | Below 0.6 | Limits microbial growth in powder. |
| Shelf life | 18–24 months | Sealed, cool, dry storage; product-specific. |
Regulatory status differs by country and intended use. In many jurisdictions, whey protein hydrolysate is regulated as a food ingredient, while specific infant formula or medical food uses may require additional review. Labeling rules govern protein content claims, allergen statements, and terms such as partially hydrolyzed or extensively hydrolyzed. Analytical methods for degree of hydrolysis are not fully standardized, so values can depend on the assay. This variability makes direct comparison between products difficult unless the method and reference material are stated.
Quality control for whey protein hydrolysate begins with specification of protein, moisture, ash, fat, lactose, and degree of hydrolysis, while molecular weight distribution is measured by size-exclusion chromatography or electrophoresis. Free amino acid content can be quantified by amino acid analysis. Microbial limits, heavy metals, and residual enzyme activity are also monitored. Because hydrolysis conditions influence batch consistency, manufacturers validate processes and test each lot against release criteria. Sampling plans and reference standards help compare results across laboratories.
Analytical control focuses on protein content, hydrolysis extent, molecular weight distribution, and residual intact protein. Kjeldahl or Dumas methods measure total nitrogen, while size-exclusion chromatography or mass spectrometry estimates peptide profiles. Sodium dodecyl sulfate polyacrylamide gel electrophoresis can show remaining intact proteins, though small peptides may not resolve. Enzyme-linked immunosorbent assays are used to assess residual allergenic proteins in some contexts. Because no single method captures all relevant features, manufacturers combine several assays and report values against internal specifications.
Stability depends on moisture, temperature, oxygen, and packaging. Powdered hydrolysate generally requires cool, dry storage and protection from humidity because peptides can absorb water and undergo Maillard reactions with residual lactose. Higher temperatures can increase bitterness, discoloration, and loss of solubility over time, while liquid hydrolysate formats are more perishable and may need refrigeration or preservatives. Shelf-life studies typically monitor moisture, color, pH, protein solubility, and microbial counts. Exact stability limits vary by peptide profile, packaging, and water activity, so general rules should be treated as approximate.
Industrial production begins with whey protein concentrate or isolate dispersed in water. Selected proteases, such as trypsin, pepsin, or microbial enzymes, are added under controlled pH and temperature. Hydrolysis continues until a target hydrolysis level is reached, after which heat or pH adjustment inactivates the enzyme. Ultrafiltration, diafiltration, and ion exchange may remove larger peptides, salts, or residual lactose. The liquid is then concentrated and spray-dried into powder. Processing choices influence peptide size, bitterness, mineral content, and microbial quality.
Physical properties such as particle size, bulk density, and reconstitution behavior affect handling and finished product quality. Water activity and moisture content influence shelf life; high moisture can promote caking, browning, and microbial growth. Color is monitored because Maillard reactions between peptides and reducing sugars can darken the powder during storage. Taste panels and instrumental methods may assess bitterness, which is a common challenge for hydrolysates. Specifications often include limits for heavy metals, microbiological counts, and residual fat, depending on the intended market.
Quality control for hydrolyzed whey protein focuses on composition, peptide size, and batch consistency. Protein content is commonly measured by Kjeldahl or combustion analysis, while moisture and ash are determined by gravimetric methods. Peptide molecular weight distribution is often assessed by size exclusion chromatography or mass spectrometry. The extent of hydrolysis can be estimated by titration, trinitrobenzenesulfonic acid assays, or formol titration. Because hydrolysis produces a complex mixture, no single test captures every relevant property, and laboratories often combine several methods.
People can also develop CJD because they carry a mutation of the gene that codes for the prion protein (PRNP), located on chromosome 202p12-pter. This occurs in only 10–15% of all CJD cases. In sporadic cases, the misfolding of the prion protein is a process that is hypothesized to occur as a result of the effects of aging on cellular machinery, explaining why the disease often appears later in life. An EU study determined that "87% of cases were sporadic, 8% genetic, 5% iatrogenic and less than 1% variant." Testing for CJD has historically been problematic, due to the nonspecific nature of early symptoms and difficulty in safely obtaining brain tissue for confirmation. The diagnosis may initially be suspected in a person with rapidly progressing dementia, particularly when it is also found with the characteristic medical signs and symptoms such as involuntary muscle jerking, difficulty with coordination/balance and walking, and visual disturbances. Further testing can support the diagnosis and may include:
Amanda Grace Paulovich is an oncologist, and a pioneer in proteomics using multiple reaction monitoring mass spectrometry to study tailored cancer treatment. Paulovich received a BS in Biological Sciences from Carnegie Mellon University in 1988, a PhD in Genetics from University of Washington in 1996, under the direction of Leland Hartwell. She also received a MD from University of Washington in 1998. Follow her residency in Internal Medicine at Massachusetts General Hospital, she also completed a Postdoctoral Fellowship in Computational Biology at the Massachusetts Institute of Technology Whitehead Center for Genomic Research in 2003, and a Fellowship in Medical Oncology at the Dana Farber Cancer Institute in 2004.
Prolactin is available commercially for use in other animals, but not in humans. It is used to stimulate lactation in animals. The biological half-life of prolactin in humans is around 15–20 minutes. The D2 receptor is involved in the regulation of prolactin secretion, and agonists of the receptor such as bromocriptine and cabergoline decrease prolactin levels while antagonists of the receptor such as domperidone, metoclopramide, haloperidol, risperidone, and sulpiride increase prolactin levels. D2 receptor antagonists like domperidone, metoclopramide, and sulpiride are used as galactogogues to increase prolactin secretion in the pituitary gland and induce lactation in humans. Breast-feeding Breastfeeding and fertility Epileptic seizure Hyperprolactinaemia Hypothalamic–pituitary–prolactin axis Male lactation Prolactin modulator Prolactin receptor Prolactin-releasing hormone Prolactinoma Weaning MedlinePlus Encyclopedia: Prolactin Overview of all the structural information available in the PDB for UniProt: P01236 (Prolactin) at the PDBe-KB.
Actovegin is a highly filtered extract obtained from calf blood which enhances aerobic oxidation in mammals. This improves absorption of glucose and oxygen uptake in tissue, which may enhance physical performance and stamina. Local utilisation is allowed in countries like Canada and Sweden. Doctors like Hans-Wilhelm Müller-Wohlfahrt and Richard Steadman think Actovegin should be allowed in general. Others think there is not enough research, and persons from the World Anti-Doping Agency like Olivier Rabin is sceptical that it is having more than a placebo effect. Actovegin made headlines from 2009 to 2011 when Canadian sports doctor Anthony Galea was charged with drug smuggling, conspiring to lie to federal agents, unlawful possession with intent to distribute and practising medicine without a licence in the United States. Galea pleaded guilty of bringing misbranded and unapproved drugs, including Nutropin, a human growth hormone, and Actovegin, into the United States. The discipline committee for the College of Physicians and Surgeons of Ontario (CPSO) suspended Galeas license for 9 months for professional misconduct.
Contributions to island of inversion measurements and potential discovery of new magic numbers The island of inversion is a region of the chart of nuclides in which isotopes have enhanced stability, compared to the surrounding unstable nuclei. The island is associated with the magic neutron numbers (N = 8, 14, 20, 28, 50, 82, 126), where this breakdown occurs. Various experiments at ISOLDE have determined properties of these island of inversion isotopes, including the first of their kind measurements performed with Miniball on magnesium-32, lying in the island of inversion at N = 20. Furthermore, the ISOLTRAP experiment provided results using calcium-52 to reveal a potential new magic number, 32, which was later disproven by the CRIS experiment. Production of isomeric beams A nuclear isomer is a metastable state of a nucleus, in which one or more nucleons occupy higher energy levels than in the ground state of the same nucleus. In the mid-2000s, REX-ISOLDE developed a technique to select and post-accelerate isomeric beams to use in nuclear-decay experiments, such as at Miniball.
Sources: en.wikipedia.org
Inactivated vaccines are composed of micro-organisms that have been killed with chemicals and/or heat and are no longer infectious. Examples are vaccines against flu, cholera, plague, and hepatitis A. Most vaccines of this type are likely to require booster shots. Live, attenuated vaccines are composed of micro-organisms that have been cultivated under conditions which disable their ability to induce disease. These responses are more durable, however, they may require booster shots. Examples include yellow fever, measles, rubella, and mumps. Toxoids are inactivated toxic compounds from micro-organisms in cases where these (rather than the micro-organism itself) cause illness, used prior to an encounter with the toxin of the micro-organism. Examples of toxoid-based vaccines include tetanus and diphtheria. Subunit, recombinant, polysaccharide, and conjugate vaccines are composed of small fragments or pieces from a pathogenic (disease-causing) organism. A characteristic example is the subunit vaccine against Hepatitis B virus. In addition, there are some newer types of vaccines in use:
RdRps can be used as drug targets for viral pathogens as their function is not necessary for eukaryotic survival. By inhibiting RdRp function, new RNAs cannot be replicated from an RNA template strand, however, DNA-dependent RNA polymerase remains functional. Some antiviral drugs against Hepatitis C and COVID-19 specifically target RdRp. These include Sofosbuvir and Ribavirin against Hepatitis C and remdesivir, an FDA approved drug against COVID-19 GS-441524 triphosphate is a substrate for RdRp, but not mammalian polymerases. It results in premature chain termination and inhibition of viral replication. GS-441524 triphosphate is the biologically active form of remdesivir. Remdesivir is classified as a nucleotide analog that inhibits RdRp function by covalently binding to and interrupting termination of the nascent RNA through early or delayed termination or preventing further elongation of the RNA polynucleotide. This early termination leads to nonfunctional RNA that gets degraded through normal cellular processes. Baloxavir marboxil is an approved drug for the treatment of influenza infection. In addition, suraxavir marboxil and tivoxavir marboxil are currently undergoing clinical trials for the same indication. The development of an other inhibitor pimodivir, has been halted.
36. Georgian Med News. 2006 Apr;(133):111-5. Anti-aging peptide bioregulators induce reactivation of chromatin. Lezhava T(1), Monaselidze J, Kadotani T, Dvalishvili N, Buadze T. Author information: (1)Tbilisi State University. The effect of synthetic peptide bioregulators (Epitalon, Livagen and Vilon) on structural and facultative heterochromatin of cultivated lymphocytes have been studied among old (75-88yr.) people. The data obtained indicate that epitalon, livagen and vilon: 1) activate synthetic processes, caused by reactivation of ribosomal genes as a result of deheterochromatinization (decondensation) of nucleolus organizer regions; 2) induce unrolling (deheterochromatinization) of total heterochromatin; 3) release genes repressed by heterochromatinization (condensation) of euchromatic regions forming facultative heterochromatin; 4) epitalon and livagen induce deheterochromatinization (decondensation) of pericentromeric structural heterochromatin of the chromosomes1 and 9. However, vilon does not induce deheterochromatinization of pericentromeric structural heterochromatin. These results indicate that peptide bioregulators Epitalon, Livagen and Vilon cause activation (deheterochromatinization) of chromatin in lymphocytes of old individuals.
Advanced product quality planning is a process developed in the late 1980s by a commission of experts who gathered around the 'Big Three' of the US automobile industry: Ford, GM, and Chrysler. Representatives from the three automotive original equipment manufacturers (OEMs) and the Automotive Division of American Society for Quality Control (ASQC) created the Supplier Quality Requirement Task Force for developing a common understanding on topics of mutual interest within the automotive industry. This commission worked five years to analyze the then-current automotive development and production status in the US, Europe, and especially in Japan. At the time, the Japanese automotive companies were successful in the US market. APQP is utilized by US automakers and some of their affiliates. Tier 1 suppliers are typically required to follow APQP procedures, techniques, and are also typically required to be audited and registered to IATF 16949. This methodology is also being used in other manufacturing sectors. The Automotive Industry Action Group (AIAG) is a non-profit association of automotive companies founded in 1982. The basis for the process control plan is described in AIAG's APQP manual These include:
Acanthosis nigricans-muscle cramps-acral enlargement syndrome, also known as Acanthosis nigricans-insulin resistance-muscle cramps-acral enlargement syndrome, is an extremely rare genetic disorder which is characterized by the appearance of acanthosis nigricans, insulin resistance, muscle cramps of severe intensity, and acral hypertrophy/enlargement. Only 2 cases have been reported in medical literature. It was first discovered when Jeffrey Flier and his colleagues described two siblings of the opposite sex with the symptoms mentioned above. (plus: large, chunky hands), the sister had virilized polycystic ovaries. After being treated with dilantin, the cramps' severity lowered and the brother's insulin resistance also lowered. The inheritance pattern of this disorder is thought to be autosomal recessive.
Sources: en.wikipedia.org
Common laboratory methods measure free amino groups with TNBS or OPA reagents. The result is converted to a percentage using a reference standard and a defined protocol. Values are method-dependent, so comparisons require the same assay conditions.
Size-exclusion chromatography separates peptides by molecular size, while reversed-phase HPLC separates them by hydrophobicity. Mass spectrometry provides mass and sequence information for individual peptides. Together these methods give a more complete picture than any single technique.
Yes, free amino group assays and peptide profiles usually differ between the two. However, blends and partially hydrolyzed samples can make interpretation difficult. Authenticity testing often combines several methods rather than relying on one marker.
Peptide size is commonly estimated by size-exclusion chromatography, gel electrophoresis, or mass spectrometry. These techniques separate or identify molecules according to mass or hydrodynamic volume. Results depend on calibration and method conditions, so they are best compared within the same analytical protocol.